
2026-11-21 · Watches And More
Those little red dots inside a mechanical movement have a surprisingly demanding job—and a history with a touch of intrigue.
Turn over a watch with a display caseback and you might spot tiny red or pink circles among the bridges and gears. Then you notice the inscription: 17 jewels. 21 jewels. 24 jewels.
Has your watchmaker hidden a treasure chest in there?
The real story is more interesting. Movement jewels are precision components that help manage friction and wear. Many serve as bearings for the tiny pivots on which moving parts turn. They may look like decoration, but these stones have work to do. Fondation Haute Horlogerie explains the role of ruby.
🔍 Inside the Jewel Hole: A Tiny Shaft Needs a Good Home
Imagine a miniature wheel mounted on a shaft. The narrow ends of that shaft—its pivots—need support while allowing the wheel to rotate freely.
In a typical pierced jewel bearing, the pivot sits inside a precisely sized hole in a polished synthetic ruby. The jewel is usually fitted into a movement plate or bridge. Its hard bearing surface, paired with the steel pivot, helps minimize friction.
There is more to that red dot than a hole, too. An oil sink, a small recess around the bore, holds lubricant where the bearing needs it. Horopedia illustrates the construction of a simple bearing.
Think of a door hinge reduced to watchmaking scale. Supporting the moving part is only the beginning; the contact surfaces and lubrication matter every time it moves.
💎 Why Ruby—and Is It Real?
Ruby is a very hard form of corundum, or aluminium oxide. Modern watchmaking uses synthetic rubies, drilled and polished for their mechanical role. “Synthetic” describes their manufactured origin; it does not mean a piece of red plastic pretending to be a gemstone. FHH’s ruby glossary.
FHH credits chemist Auguste Verneuil with developing synthetic ruby in 1891–1892 and making the method public in 1902. It notes that synthetic ruby has the same properties as its natural counterpart. Read about scientific ruby.
For a movement, the attraction is a useful material shaped for a specific job. The romance comes from realizing that one of those jobs is quietly helping your watch survive years of motion.
⚙️ Not Every Jewel Has a Hole
The Seiko Museum explains that a movement can use both hole jewels around a shaft and cap jewels without holes at its ends. Jewels also appear as pallet stones and the impulse pin in the escapement system. These are working contact surfaces rather than wheel bearings. Seiko Museum: Why are stones required in watches?
Horopedia distinguishes simple bearings from bearings with endstones and shock-protected assemblies. An endstone helps control movement along the shaft’s axis. In a shock-protected balance bearing, a spring-held setting can move slightly under impact to help protect the delicate pivot. Explore the different bearing arrangements.
The ruby does not do all of that alone. Its shape, setting and neighboring components form a system.
📜 A Small Hole with a Big History
In 1704, Nicolas Fatio de Duillier and the watchmaking Debaufre brothers patented a method of piercing jewels for watch mechanisms. FHH describes a process using a treadle lathe and a diamond-tipped tool to work the hard stone. Read FHH’s account of Fatio’s work.
It is an appealing reversal of the usual gemstone story. The valuable feature was the carefully made opening—and the useful surface inside it.
🕵️ The Watch That Became Patent Evidence
The history even offers a little courtroom-style intrigue.
The Science Museum Group records a watch by Ignatius Huggeford, made around 1675, with silver and tortoiseshell cases. In 1704, the Worshipful Company of Clockmakers bought it for £2 and 10 shillings and used it as evidence against an extension of Fatio’s jewelling patent.
The museum describes that use as apparently fraudulent. Its component description cautiously calls the conspicuous feature a ruby/glass “endstone.” That wording matters: this is not a straightforward example to present as proof of an earlier working ruby bearing. Examine the museum’s object record.
For a clearer functional example, the Metropolitan Museum of Art documents a Daniel Delander pair-case watch, circa 1715–1719. Its pink diamond endstone has a tiny hole drilled partway through it and serves the balance staff. See the Met’s Delander watch and technical description.
One story concerns disputed evidence; the other identifies the stone and its actual mechanical job. A jewel’s presence is interesting. What it does is the crucial question.
🔢 Does More Jewels Mean a Better Watch?
Our advice: treat jewel count as a specification to understand, not a score to chase.
Consider two documented movements from Miyota:
| Specification | Miyota 8215 | Miyota 9015 |
|---|---|---|
| Jewel count | 21 | 24 |
| Movement height | 5.67 mm | 3.90 mm |
| Vibration rate | 21,600 per hour | 28,800 per hour |
Sources: Miyota 8215 specifications · Miyota 9015 specifications
These are different movement designs with several differences to assess. The table does not establish that three extra jewels cause a thinner movement or a higher vibration rate.
When comparing watches, ask what the movement offers, how it performs and how it suits your needs. Counting the red dots is only one small part of that conversation.
💡 Did You Know?
A jewel bearing still needs appropriate lubrication. The Seiko Museum describes oil working with the hard stones to support reliable movement. Read Seiko’s explanation.
So, yes: there can be rubies inside your watch. That does not give the movement permission to skip its maintenance.
⭐ Why It Matters
Jewels reveal a less obvious side of watchmaking: the careful management of contact between tiny moving parts. A beautiful movement is also a machine, and its small supporting components deserve attention alongside the spectacular complications.
Understanding their function also changes how you read a specification sheet. “24 jewels” becomes an invitation to explore the mechanism rather than the end of the discussion.
❤️ The W&M Take: These Rubies Earn Their Keep
At Watches And More, we love a detail that rewards a second look. Movement jewels deliver exactly that: a flash of color, a useful engineering solution and a history that even includes a disputed patent battle.
The next time you spot those little red circles, imagine the pivots turning inside them. That is where the real story begins.
Would you rather explore a movement’s tiny working components—or the historical disputes behind its inventions?
Sources & Further Reading
- Seiko Museum Ginza — Why are Stones Required in Watches?
- Horopedia — Simple Bearings
- Horopedia — Bearings (Jewels)
- Fondation Haute Horlogerie — Ruby
- Fondation Haute Horlogerie — Synthetic Ruby
- Fondation Haute Horlogerie — Nicolas Fatio de Duillier
- Science Museum Group / Clockmakers’ collection — Ignatius Huggeford watch
- The Metropolitan Museum of Art — Daniel Delander pair-case watch
- Miyota — Calibre 8215 and Calibre 9015
Disclaimer: Every effort has been made to keep these watch facts accurate, but the world of horology is full of myths, disputed stories, and fascinating trivia. Consider these facts a starting point for discovery rather than the final word. If you have corrections or additional insights, let us know—we’re always happy to keep the record ticking in the right direction.
Read Next
Watches And More · Watch Fact Archive · Companion site
Discover more from WatchesAndMoreCO
Subscribe to get the latest posts sent to your email.
